News

Alstrong Aerator

Posted by Dianne Bisdee on 12 October 2017

Click on the link below to go to Another demo of Alstrong Aerator in Tokoroa, in conjunction with Tony Ireland Contracting. Aeration done over existing grass cover and still able to graze after finished, as very minimal pasture damage. This was carried out on a farm that has whey sprayed on regularly. The results were very pleasing.  For further information on this amazing machine, contact us at Duncan Ag - www.duncanag.com

Read the full post


Ireland - National Ploughing Championships 2017

Posted by Dianne Bisdee on 19 September 2017

Check out the link below to Agriland - Ireland.  Duncan Ag will be on dispaly at the Irish National Ploughing Championships.

Read the full post


Stock and Land - AS6100 Review

Posted by Dianne Bisdee on 15 August 2017

Click on the link below to check out the article on the Duncan AS6100

Read the full post


Trade Farm machinery - Multi Plus Review

Posted by Dianne Bisdee on 27 April 2017

Click on the link below to check out the article and video on the Duncan Agmech Multi Plus

Read the full post


Duncan Ag Assembly

Posted by Dianne Bisdee on 23 March 2017

Duncan Ag's head office and factory is based in Timaru, New Zealand. Check out these photos of our assembly division.

Read the full post


FTMTA Farm Machinery Show - Ireland 2017

Posted by Dianne Bisdee on 14 February 2017

Craig McIsaac from Duncan Ag recently attended the FTMTA Farm Machinery Show, Punchestown, County Kildare, Ireland where Tom Tierney, our Irish distributor, was displaying our machines.

Read the full post


2016 Irish Plough Match Field Days

Posted by Dianne Bisdee on 26 August 2016

Duncan Ag will be 1 of 5 NZ companies on the NZT&E stand at the 2016 Irish Plough Match field days held on 20-22 September at Screggan, County Offaly.

Read the full post


Grass & Muck Show - Ireland 2016

Posted by Dianne Bisdee on 16 May 2016

Craig McIsaac from Duncan Ag recently attended the bi-annual Grass & Muck Show in Roscrea, County Tipperary, Ireland.  1st time for Duncan Ag to be displaying machines in Ireland.DSCN5

Read the full post


Duncan Drill Refurbishment Promo - Winter 2016

Posted by Dianne Bisdee on 20 April 2016

Now’s the time to plan to refurbish your Duncan seed drill - after completing autumn sowing or in preparation for spring sowing!!

Read the full post


Successful drought project leads to new policy on-farm

Posted by Dianne Bisdee on 22 February 2016

A unique drought support initiative offered to North Canterbury farmers last spring has changed the way one of them manages his land, for good.

Read the full post


Recommendations for establishing pasture in dry land conditions

Posted by Rob Flynn, Soil Matters on 19 February 2016

To establish a good long term permanent pasture, we recommend the area would have been through a short term crop/brassica to try to clean the seed bed. 

Read the full post


Australian Dealer Day

Posted by Dianne Bisdee on 11 December 2015

At Duncan Ag we take training our dealer network seriously.  We recently had a 'hands on' demo day in Australia so dealers could not only spend time in the classroom with our Operations & Technical Manager - Richard Jamieson but also out in the field.  Dealers got to spend valuable learning time on the Duncan Agmech Multi, Eco Feeder and Renovator TFD.

Read the full post


Project North Canterbury - Rural Dilvery

Posted by Dianne Bisdee on 12 October 2015

We featured in Saturday's episode of Rural Delivery.

Read the full post


Drill winners ready to sow

Posted by Dianne Bisdee on 10 October 2015

Two happy farmers are set to experience the best of no-till drilling this season, without having to pay a cent.

Read the full post


Tough new trailers ready for spring

Posted by Dianne Bisdee on 1 October 2015

Robust new transport tip trailers launched just in time for the new season have already attracted good feedback for South Canterbury machinery specialist Duncan Ag.

Read the full post


Project North Canterbury - Making a difference, together

Posted by Dianne Bisdee on 18 August 2015

Ten North Canterbury farmers affected by drought will have help turning their bare brown paddocks green again this spring under a new initiative announced today.

Read the full post


Dairy News Australia August 2015 Issue

Posted by Dianne Bisdee on 13 August 2015

Click on the link below to check out the article about Duncan Agmech machinery in the Dairy News Australia.  Page 33.

Read the full post


Sowing success in Northland

Posted by Dianne Bisdee on 4 August 2015

 A trip to the National Fieldays in June will take one Northland farming couple much further afield later this year, thanks to Canterbury no-till specialists Duncan Ag.

Read the full post


Direct drilled fodder beet gaining ground

Posted by Dianne Bisdee on 19 December 2014

Geraldine contractor Brian Waller started direct drilling fodder beet three years ago for the simplest of reasons – one of his clients asked him to.

Read the full post


Rates go down to push up pasture renewal

Posted by Dianne Bisdee on 5 September 2014

There’s never been a better time than this spring to take advantage of all the benefits of no-till pasture renewal, thanks to a special finance offer from one of New Zealand’s leading seed drill manufacturers.

Read the full post


Improved seeding technologies demand high quality seed

Posted by Duncan Ag, courtesy of Professor John Hampton on 17 July 2014

Improvements in seeding technologies for crop and pasture establishment have delivered increasing environmental and financial benefits through:

Read the full post


Duncan Ag rolls out new machinery offering

Posted by Dianne Bisdee on 4 June 2014

Combining two strong New Zealand machinery manufacturers into one business is a win:win for all involved, including customers.

Read the full post


Duncan Ag exports New Zealand drilling technology to Uruguay

Posted by Dianne on 20 January 2014

Duncan Ag, the specialist farm machinery manufacturer, is moving into South America with plans to commercially export its popular Renovator MK4 drills to Uruguay by year end.

Read the full post


Sign up for our Newsletter
© 2017 Duncan Ag   |   Website by GoAnna Design / Plato Creative